Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13655374

- Product Categories
- Friendly Links
- home > Supply > _ Rui Shi standard injection mold plastic mold (certified) _ Zhongshan injection mold
Information Name: | _ Rui Shi standard injection mold plastic mold (certified) _ Zhongshan injection mold |
Published: | 2015-02-09 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | The role of each injection mold plastic parts of a lateral pulling on the core institutions of the lateral injection mold plastic parts such as concave, convex shape of the hole or boss, which requires lateral concave punch or molded core . Prior to the introduction of the plastic parts are, you must first remove the lateral side of the punch or out of the core, and then can only emerge successfully. So that the lateral or side punch core mechanism for moving sideways to become core-pulling mechanism. 2, the ejection mechanism of injection mold ejection mechanism refers to the mold parting after the plastic parts of the device from the top of the pole, the reset lever ejector fixing plate, roof, sprue pulling rod and other components. 3, cooling and heating systems in order to allow the molten plastic injection mold cavity in the mold injection mold curing ordered as soon as possible, so as to improve production efficiency, when some of the plastic molding, the mold must be cooled normally open cooling channels in the mold, watercourse to the mold is cooled by circulating cold water. Require some plastic molding mold temperature to adapt to, the need for cooling the mold when most of the plastic molding. Dongguan plastic mold manufacturer teach you how to take care of a few key tracking and detection of an important part of the mold die: the top of the guide member's role is to ensure that the opening and closing movement of the mold and plastic parts stripping, if any part of the damage and the card, resulting in the production of injection molds, mold should maintain lubrication thimble, pilots (select the most appropriate lubricant), and regularly check thimble, deformation and surface damage guide post, once found, should be replaced; after the completion of a production cycle of anti-rust oil-coated professional mold, motor, rail work surface, you should pay attention to the protection of elastic strength and gears, rack mold bearing parts and springs mold, make sure it is always in top working condition; scale production with deposition time, cooling waterways corrosion, mud and algae, the cooling channel cross section smaller standard injection molds, cooling channel narrows significantly reduces the rate of heat exchange between the coolant and the mold, increasing production costs, and therefore should attract attention again by cleaning; heat runner mold, heating and maintenance of the control system to prevent the production of failure, which is especially important. Therefore, after the end of each production cycle of every dead band heater injection mold manufacturer, rod heaters, measured with an ohmmeter, if the damage to the heating and thermocouple probes, should be replaced, and the recovery compared with the mold, make a record, to identify problems and take action. _ Rui Shi standard injection mold plastic mold (certified) _ Injection Mold Co., Ltd., Zhongshan, Dongguan Rui Shi by plastic mold. Dongguan Rui Shi Plastic Co. (www.dgsrmj.com) is Dongguan, Guangdong, plastic leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Rui Shi plastic mold in leadership with the staff warmly welcome all inquiries negotiations to create Rui Shi plastic mold a better future. |
Admin>>>
You are the 27950 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Rui Shi Plastic Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 27950 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Rui Shi Plastic Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility